Flowserve MENBLOC Range
MENBLOC is the closed coupled configuration of the MEN water pump. Not requiring a baseplate or coupling, it is an economical alternative to the frame-mounted ME.
Applications
HVAC, Water Treatment, Water Supply and Distribution (water), Agriculture, Ground Water Development and Irrigation, Fire Protection
Industries
Water Resources, General Industries
The MEN family of single-stage, end-suction water pumps delivers maximum mechanical and hydraulic flexibility and low total cost of ownership. Available in both framemounted and close-coupled configurations, the MEN family of pumps is ruggedly designed to provide long, reliable performance in a variety of water services. Furthermore, the MEN’s optimal hydraulics and minimal maintenance need provide users with significant cost savings.
Available in 33 sizes from 50 mm x 32 mm (2 in x 1.25 in) to 200 mm x 150 mm (8 in x 6 in), the MEN family of water pumps consists of multiple designs with varied hydraulic capabilities to meet application needs. MEN water pumps destined for Europe are CE marked and comply with the dimensional requirements of the latest editions of EN 733 and DIN 24 255.
Operating Parameters
- Flows to 800 m3/h (3500 gpm)
- Heads to 140 m (450 ft)
- Pressures to 16 bar (230 psi)
- Temperatures from -10°C (15°F) to 140°C (280°F)
- Speeds to 3500 rpm
Features and Benefits
- Volute Casing Design has flanges to ISO PN 10/16 or ANSI B16.1 specifications
- Precision Cast Closed Impeller with extended hub has machined shrouds and is dynamically balanced for high efficiency. Axial thrust is minimized by balancing chamber and holes on the rear side
- Sturdy Bearing Housing incorporates greased-for-life, large diameter, reinforced ball bearings protected by thrower and covers
- Open Seal Chamber features integral vortex breaking ribs to extend the life of mechanical seals
- Standard Internal Elastomeric Bellows Mechanical Seal readily accommodates misalignment, end-float and seal face wear. Packing is also available
- Oversized Stainless Steel Shaft is conservatively designed to minimize deflection and reduce wear
- Back Pullout Design facilitates inspection and maintenance
Add the quantities you require in the boxes and click 'add' to add to basket.
Prices are shown in € (EUR)
| Item | Image | Materials/Options | In Stock | Price | Quantity |
|---|
